KA-Nucleo-Multisensor

__jzXpdf__

Description

KA-Nucleo-Multisensor is an expansion board (shield). It extends functionality of development board from STM32 Nucleo series. Shield has ST Morpho connectors and was equipped i.a. with 4-Digit 7-Segment LED Display, four RGB LEDs, accelerometer LIS35DE, pressure sensor LPS25HB and also digital thermometer DS18B20.

Basic features and parameters

• Shield that extends functionality of STM32 Nucleo-64 series boards
• On-board 7-Segment Display (4-Digit, four decimal points)
• On-board four tricolour LEDs
• Embedded MEMS accelerometer type LIS35DE
  • Acceleration measurement in three axis
  • Measurement range: ±2g/±8g
  • Functional of “Click” recognition
  • Interface: SPI
• Embedded MEMS pressure sensor type LPS25HB
  • Measurement range: from 260 to 1260 mbar absolute pressure range (260 - 1260 hPa)
  • Measurement resolution: 0,01 hPa RMS
  • Measurement output data rate: (ODR): 1 – 25 [Hz]
  • ADC converter resolution: 24 bits
  • Interface: I2C
• Embedded temperature sensor DS18B20
  • Temperature measurement in range -55°C do +125°C
  • Temperature measurement precision w range -10°C do +85°C: ±0,5°C
  • Interface: 1-Wire
• Embedded photoresistor for light intensity measurements in environment
• On-board two user push-buttons
• On-board miniUSB connector, which allows data transfer by using GPIO pins (PA11, PA12)
• Size: 70 x 54 x 28 mm
• Weight: 28 g

Standard equipment

Code	Description
KA-Nucleo-Multisensor	Assembled and launched module

Electrical schematics

External links

• LIS35DE datasheet
• DS18B20 datasheet
• LPS25HB datasheet