Actions

KA-Nucleo-Multisensor: Difference between revisions

From Kamamilabs.com - Wiki

← Older edit
m Text replacement - "__jzpdf__" to "__jzXpdf__"
 
(21 intermediate revisions by 3 users not shown)
Line 1: Line 1:
====== Opis ======
__jzXpdf__
[https://kamami.pl/kamod-kamami/563404-ka-nucleo-multisensor-shield-dla-stm32-nucleo-z-wyswietlaczem-i-czujnikami-mems.html KA-Nucleo-Multisensor] to ekspander (nakładka) rozszerzający funkcjonalność płytki uruchomieniowej serii STM32 Nucleo. Shield ma złącza ST Morpho i wyposażony został w m.in. w czteroznakowy wyświetlacz 7-segmentowy, cztery diody RGB, akcelerometr LIS35DE, czujnik ciśnienia LPS25HB, a także termometr cyfrowy DS18B20
====== Description ======
 
[https://kamami.pl/kamod-kamami/563404-ka-nucleo-multisensor-shield-dla-stm32-nucleo-z-wyswietlaczem-i-czujnikami-mems.html KA-Nucleo-Multisensor] is an expansion board (shield). It extends functionality of development board from STM32 Nucleo series. Shield has ST Morpho connectors and was equipped i.a. with 4-Digit 7-Segment LED Display, four RGB LEDs, accelerometer LIS35DE, pressure sensor LPS25HB and also digital thermometer DS18B20.


<center>
<center>
[[Plik:KA-Nucelo-Multisensor.png|none|400px|thumb|center]]
[[File:KA-Nucleo-Multisensor_ekspander.png|none|400px|thumb|center]]
</center>
</center>


===== Podstawowe cechy i parametry =====
===== Basic features and parameters =====
*Nakładka rozszerzająca funkcjonalność płytek serii STM32 Nucleo-64
*Shield that extends functionality of STM32 Nucleo-64 series boards
*Wbudowany wyświetlacz siedmiosegmentowy (4 cyfry, cztery kropki dziesiętne)
*On-board 7-Segment Display (4-Digit, four decimal points)
*Wbudowane cztery diody trójkolorowe
*On-board four tricolour LEDs
*Wbudowany akcelerometr MEMS typu LIS35DE
*Embedded MEMS accelerometer type LIS35DE  
**Pomiar przyspieszenia w trzech osiach
**Acceleration measurement in three axis
**Zakres pomiarowy: ±2g/±8g
**Measurement range: ±2g/±8g
**Funkcja rozpoznawania "kliknięcia"
**Functional of “Click” recognition
**Interfejs: SPI
**Interface: SPI
*Wbudowany czujnik ciśniemia MEMS typu LPS25HB
*Embedded MEMS pressure sensor type LPS25HB
**Zakres pomiarowy: od 260 do 1260 mbar ciśnienia bezwzględnego (260 - 1260 hPa)
**Measurement range: from 260 to 1260 mbar absolute pressure range (260 - 1260 hPa)
**Rozdzielczość pomiaru: 0,01 hPa RMS
**Measurement resolution: 0,01 hPa RMS
**Częstotliwość pomiarów (ODR): 1 - 25 [Hz]
**Measurement output data rate: (ODR): 1 – 25 [Hz]
**Rozdzielczość przetwornika ADC: 24 bity
**ADC converter resolution: 24 bits
*Interfejs: I2C
**Interface: I2C
*Wbudowany czujnik temperatury DS18B20
*Embedded temperature sensor DS18B20
**Pomiar temperatury w zakresie -55°C do +125°C
**Temperature measurement in range -55°C do +125°C
**Dokładność pomiaru temperatury w zakresie -10°C do +85°C: ±0,5°C
**Temperature measurement precision w range -10°C do +85°C: ±0,5°C
**Interfejs: 1-Wire
**Interface: 1-Wire
*Wbudowany fotorezystor do pomiaru naświetlenia w otoczeniu
*Embedded photoresistor for light intensity measurements in environment
*Wbudowane dwa przyciski użytkownika
*On-board two user push-buttons
*Wbudowane gniazdo USB typu mini, pozwalające na wymianę danych przy pomocy linii GPIO (PA11, PA12)
*On-board miniUSB connector, which allows data transfer by using GPIO pins (PA11, PA12)
*Wymiary: 70 x 54 x 28 mm
*Size: 70 x 54 x 28 mm
*Waga: 28 g
*Weight: 28 g


===== Wyposażenie standardowe =====
===== Standard equipment =====
<center>
<center>
{| class="wikitable"  style="width: 1000px;"
{| class="wikitable"  style="width: 1000px;"
|-
|-
! style="text-align: center;"|Kod
! style="text-align: center;"|Code
! style="text-align: center;"|Opis
! style="text-align: center;"|Description
|-
|-
| style="text-align: center;"|<b>KA-Nucleo-Multisensor</b>
| style="text-align: center;"|<b>KA-Nucleo-Multisensor</b>
| style="text-align: center;"|
| style="text-align: center;"|
*Zmontowany i uruchomiony moduł
*Assembled and launched module
|}
|}
</center>
</center>


===== Linki zewnętrzne =====
===== Electrical schematics =====
*[http://download.kamami.pl/p563404-lis35de.pdf Karta katalogowa układu LIS35DE]
 
*[http://download.kamami.pl/p563404-ds18b20.pdf Karta katalogowa układu DS18B20]
<center>
*[http://download.kamami.pl/p563404-p557728-lps25hb.pdf Karta katalogowa układu LPS25HB]
[[File:KA-Nucleo-Multisensor schemat.png|none|800px|thumb|center]]
</center>


[[Kategoria:Moduły peryferyjne KAmod (Kamami)]]
===== External links =====
[[Kategoria:Zawartość]]
*[http://download.kamami.pl/p563404-lis35de.pdf LIS35DE datasheet]
*[http://download.kamami.pl/p563404-ds18b20.pdf DS18B20 datasheet]
*[http://download.kamami.pl/p563404-p557728-lps25hb.pdf LPS25HB datasheet]

Latest revision as of 23:43, 29 October 2024

__jzXpdf__

Description

KA-Nucleo-Multisensor is an expansion board (shield). It extends functionality of development board from STM32 Nucleo series. Shield has ST Morpho connectors and was equipped i.a. with 4-Digit 7-Segment LED Display, four RGB LEDs, accelerometer LIS35DE, pressure sensor LPS25HB and also digital thermometer DS18B20.


Basic features and parameters
  • Shield that extends functionality of STM32 Nucleo-64 series boards
  • On-board 7-Segment Display (4-Digit, four decimal points)
  • On-board four tricolour LEDs
  • Embedded MEMS accelerometer type LIS35DE
    • Acceleration measurement in three axis
    • Measurement range: ±2g/±8g
    • Functional of “Click” recognition
    • Interface: SPI
  • Embedded MEMS pressure sensor type LPS25HB
    • Measurement range: from 260 to 1260 mbar absolute pressure range (260 - 1260 hPa)
    • Measurement resolution: 0,01 hPa RMS
    • Measurement output data rate: (ODR): 1 – 25 [Hz]
    • ADC converter resolution: 24 bits
    • Interface: I2C
  • Embedded temperature sensor DS18B20
    • Temperature measurement in range -55°C do +125°C
    • Temperature measurement precision w range -10°C do +85°C: ±0,5°C
    • Interface: 1-Wire
  • Embedded photoresistor for light intensity measurements in environment
  • On-board two user push-buttons
  • On-board miniUSB connector, which allows data transfer by using GPIO pins (PA11, PA12)
  • Size: 70 x 54 x 28 mm
  • Weight: 28 g
Standard equipment
Code Description
KA-Nucleo-Multisensor
  • Assembled and launched module
Electrical schematics
External links
Retrieved from "http://wiki.kamamilabs.com/index.php?title=KA-Nucleo-Multisensor&oldid=4557"