KAmodTDA2050
From Kamamilabs.com - Wiki
Description
KAmodTDA2050 - Power amplifier 1×35 W
Audio power amplifier module with a TDA2050 circuit with a power of 35 W, powered by a voltage of 9-30 VDC, equipped with screw connectors for convenient connection of the power supply, speaker and signal input. It is equipped with thermal and short-circuit protection. It can be used in small audio devices.
Basic parameters
- Number of channels: 1
- Output power 1 x 35 W (30 V / 4 Ω)
- Power supply: 9 - 30 VDC, screw connector
- Audio input: screw connector
- Speaker output: screw connector
- Potentiometer for volume control
- Speaker impedance: from 4 Ω to 8 Ω
- Built-in thermal and short circuit protection
- Dimensions: 45 × 55 × 40 mm
Standard equipment
| Code | Description |
|---|---|
| KAmodTDA2050 | Device assembled and started |
Electrical diagram
Power supply
The amplifier module is equipped with a screw connector "+12V | GND" for connecting the power supply. The supply voltage should be between 9 and 30 VDC.
Audio input
The audio signal input is led out to the screw connector "IN+ | IN-".
Speaker output
The speaker output is available on the "OUT+ | OUT-" screw connector
Volume control potentiometer
There is a potentiometer on the board that allows smooth adjustment of the amplifier's volume.
Connection
