Revision as of 12:41, 22 September 2020 by Anna Kubacka (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


KA-Nucleo-Multisensor is an expansion board (shield). It extends functionality of development board from STM32 Nucleo series. Shield has ST Morpho connectors and was equipped i.a. with 4-Digit 7-Segment LED Display, four RGB LEDs, accelerometer LIS35DE, pressure sensor LPS25HB and also digital thermometer DS18B20.

KA-Nucleo-Multisensor ekspander.png
Basic features and parameters
  • Shield that extends functionality of STM32 Nucleo-64 series boards
  • On-board 7-Segment Display (4-Digit, four decimal points)
  • On-board four tricolour LEDs
  • Embedded MEMS accelerometer type LIS35DE
    • Acceleration measurement in three axis
    • Measurement range: ±2g/±8g
    • Functional of “Click” recognition
    • Interface: SPI
  • Embedded MEMS pressure sensor type LPS25HB
    • Measurement range: from 260 to 1260 mbar absolute pressure range (260 - 1260 hPa)
    • Measurement resolution: 0,01 hPa RMS
    • Measurement output data rate: (ODR): 1 – 25 [Hz]
    • ADC converter resolution: 24 bits
    • Interface: I2C
  • Embedded temperature sensor DS18B20
    • Temperature measurement in range -55°C do +125°C
    • Temperature measurement precision w range -10°C do +85°C: ±0,5°C
    • Interface: 1-Wire
  • Embedded photoresistor for light intensity measurements in environment
  • On-board two user push-buttons
  • On-board miniUSB connector, which allows data transfer by using GPIO pins (PA11, PA12)
  • Size: 70 x 54 x 28 mm
  • Weight: 28 g
Standard equipment
Code Description
  • Assembled and launched module
Electrical schematics
KA-Nucleo-Multisensor schemat.png
External links