Difference between revisions of "KAmodRPi-GPRS-GPS"
Anna Kubacka (talk | contribs) |
Anna Kubacka (talk | contribs) (→External links) |
||
| Line 122: | Line 122: | ||
*[https://download.kamami.pl/p571930-Quectel_MC60_Series_Hardware_Design_V2.0.pdf Quectel MC60 Series Hardware Design V2.0] | *[https://download.kamami.pl/p571930-Quectel_MC60_Series_Hardware_Design_V2.0.pdf Quectel MC60 Series Hardware Design V2.0] | ||
| + | *[https://download.kamami.pl/p571930-Quectel_MC60_AT_Commands_Manual_V1.1.pdf Quectel MC60 AT Commands manual v.1.1] | ||
Revision as of 21:13, 10 August 2020
Contents
Description
KAmodRPi-GPRS-GPS is a HAT for Raspberry Pi 3B+/3B/2B/B+ minicomputers that allows sending data via GPRS, SMS messages and to communicate via Bluetooth. This expansion receives location from satellites – GPS and GLONASS.
Basic parameters
- Expansion module for Raspberry Pi 4B, 3B+, 3B, 2B, B+ minicomputers
- Chip MC60E from Quectel
- Embedded ID-EEPROM memory
- Backup battery holder (CR1220)
- microSIM card connector
- u.FL connectors for GSM, Bluetooth, GPS/GLONASS antennas
- Integrated LED for "NETL" status
Standard equipment
| Code | Descritption |
|---|---|
| KAmodRPi-GPRS-GPS |
|
Schematic
View of board
microSIM card connector
KAmodRPi-GPRS-GPS HAT has been equipped with microSIM card connector. Card should be mounted before powering the module. Card shouldn’t be removed while module is powered!
How to insert the microSIM card:
Spacers
Included four spacers should be screwed to the KamodGPRS-GPS module to improve stability and to prevent from board tension.
