Actions

KAmodRPiPwrRELAY

Introduction

KAmodRPiPwrRELAY is a universal functional expander for RaspberryPi and Raspberry Pi+ minicomputers, equipped with two electromechanical relays and two transistor drivers (open-collector outputs) that buffer four GPIO lines and make possible to e.g. remote lighting control, switching on of heating and other tasks requiring remote access.

Fota na I str.jpg
Basic features and parameters
  • Compatibility with RaspberryPi i RaspberryPi+ minicomputers
  • Four binary outputs, including:
    • Two relay outputs
    • Two transistor outputs
  • Output states monitored with LED
  • Extended I/O pins of Rpi minicomputer
  • Screw terminals ARK

Relay outputs

  • Two SPDT outputs
  • Maximum switching voltage: 250VAC/30VDC
  • Maximum switching current (resistive load): 10A
  • Recommended maximum load currents: 5A/240VAC, 5A/28VDC

Transistor outputs

  • Two open-collector lines
  • Output circuits protected by diodes connected to +5V
  • They can be used directly or to control two additional relays
  • Maximum output current:
    • 300mA/channel (by using one channel) or
    • 200mA/ channel (by using two channels)


Kamodpwrrealy raspberry plus.jpg

The expander is adapted to cooperate also with RaspberryPi+ minicomputers

Standard equipment
Code Description
KAmodRPiPwrRELAY
  • Assembled and launched module board


Schematic
KAmodRPiP sch.png


View of board
KAmodRPiP.png


Relay outputs
KAmodRPiP rel.png


Transistor outputs
Uln2003.png


Outputs and corresponding GPIO lines of RaspberryPi minicomputer
GPIO lines Output...
GPIO22 ...relay Rel1
GPIO23 ...relay Rel2
GPIO24 ...open-collector Con4
GPIO25 ...open-collector Con3


Transistor outputs can be used for direct load control or for controlling the coils of two additional relays (as in the figure below).


KAmodRPiP prz.png


Maximum current load of the transistor outputs is limited by the maximum allowable power loss of the ULN2003 housing (details available in the chip documentation).


Installation the expander on the RaspberryPi minicomputer connector
Kamodpwrrealy RPi.jpg


Installation the expander on the RaspberryPi+ minicomputer connector
Kamodpwrrealy RPi B plus.jpg